|
Post by k357 on Aug 10, 2006 15:21:52 GMT -5
This one is based on the R/M "Aces Wild" Kustom Chopper... Paint is flat black Testors.. The engine represents the 'Evolution" 2 V-Twin... I dullcoated the assy, flowed thinned flatblack paint into the fins on the cylinders & heads, painted the lowerend semi glos balck, & ran plug wires...The only thing I left chrome were the rocker covers & pushrod tubes.... Here's he mockup of the forks/brakes/handlebar assy. .... I still have to run the clutch & throttle cables... Stay tuned & thanks for lookin!!!! ;D
|
|
|
Post by Weird Willie on Aug 10, 2006 22:33:39 GMT -5
Off to a good start Can't wait to see it finished.
|
|
|
Post by k357 on Aug 11, 2006 13:57:21 GMT -5
;DThanks Willie!!!! Well she's done!!!! Overall not a bad kit to work with... The control cables are insulated 28 ga. wire, & the rear brake line & shift linkage are 30 ga. wire... The shifter arm is scrap plastic... Thanks for lookin!!!! ;D
|
|
|
Post by gbritnell on Aug 11, 2006 21:56:53 GMT -5
It looks like it builds into a neat little bike. I'll have to pick one up and give it a try. gbritnell
|
|
|
Post by peglegrc on Aug 11, 2006 23:36:09 GMT -5
Wow...Ken that came out great! Good looking Scooter!
RC"
|
|
|
Post by k357 on Aug 12, 2006 12:28:36 GMT -5
;DThanks guys!!!!
|
|
|
Post by kevlar86 on Aug 15, 2006 14:08:30 GMT -5
That is one cool looking chopper. Awesome job Ken.
|
|
|
Post by Bluecorsair on Aug 29, 2006 10:31:11 GMT -5
That is an outstanding piece of work!!!
Make another plzzzzzzz...
Bill
|
|
|
Post by k357 on Sept 3, 2006 18:02:40 GMT -5
Thanks guys!!!! ;D Unfortuantely, these are rare in my neck of the woods.... Eventualyy I do plan on building another one based on the same kit but with the pullback handlebars from the "Crusader" & use the drag bars, & the shotgun pipes I got in a trade on the Crusader frame.... ;D
|
|